Year 2009
  1. A. Meghdari, S. Salahi Moghaddam, "Exploring Possiblities of a New Alliance between Humanities and Engineering Eduction in Iran’s Technological Universities", (in Persian), CD-Rom Proc. of  the 1st National Conference on Engineering Eduation in 1404 (2025), University of Tehran, 13-12May, 2009, Iran.  Iranian Journal of Engineering Education; Iranian Academy of Sciences, Vol. 11, No. 43, Autumn 2009.
  2. A. Ghaffari, A. Meghdari, D. Naderi, S. Eslami, "Enhancement of the tip over stability of mobile manipulators with non-holonomic constraints using an adaptive neuro-fuzzy-based controller", Proc. of IMechE, Part I, Journal of Systems and Control Engineering, Vol. 223, No. 2, pp. 201-213, 2009A. Selk Ghafari, A. Meghdari, and G. R. Vossoughi, Forward dynamics simulation of human   walking employing an iterative feedback tuning approach, Proc. of IMechE, Part I, Journal of Systems and Control Engineering, Vol. 223, No. 2, pp. 289-297, 2009.
  3. M. Mansouri Boroujeni, A. Meghdari, Haptic Device Application in Persian Calligraphy, Proc.  of the IEEE Int. Conference on Computer and Automation Engineering, pp. 160-164,   Spring 2009, Taiwan.
  4. H. Nejat Pishkenari, A. Meghdari, Simulations of Surface Defects Characterization using Force Modulation Atomic Force Microscopy, CD-Rom Proc. of the ASME 2009 Int. Design Engineering Technical Conferences (IDETC'2009), August 30-September 2, 2009, San Diego, CA,  USA.
  5. S. H. Mahboobi, A. Meghdari, N. Jalili, F. Amiri, Qualitative Study of Nanocluster Positioning Process: Planar Molecular Dynamics Simulations, Current Applied Physics Journal, Vol. 9, pp. 997-1004, 2009.
  6. A. Selk Ghafari, A. Meghdari, Gh. R. Vossoughi, Estimation of the Human Lower Extremity Musculoskeletal Conditions during Backpack Load Carrying, Scientia Iranica: Int. Journal of Science & Engineering, Transaction on Mechanical Engineering , Accepted for Publication, April 2009.
  7. H. Nejat Pishkenari, A. Meghdari, Surface Defects Characterization with Frequency and Force Modulation Atomic Force Microscopy Using Molecular Dynamics Simulations, Current Applied  Physics Journal, Vol. 10, August 2009.
  8. S. H. Mahboobi, A. Meghdari, N. Jalili, Molecular Dynamics Study of Success Evaluation for  Metallic Nanoparticles Manipulation on Gold Substrate, CD-Rom Proc. of the ASME 2009 Int. Design Engineering Technical Conferences (IDETC'2009), August 30-September 2, 2009, San   Diego, CA,  USA.
  9. M. R. Azghani, F. Farahmand, A. Meghdari, G. Vossoughi, M. Parnianpour, Design and  Evaluation of a Novel Triaxial Isometric Trunk Muscle Strength Measurement System, Proc. of  IMechE,  Part H, Journal of Enineering in Medicine, Vol. 223, pp. 755-766, 2009.
  10. S. H. Mahboobi, A. Meghdari, N. Jalili, F. Amiri, Two-Dimensional Atomistic Simulation of  Metallic Nanoparticles Pushing, Modern Physics Letters B Journal, Vol. 23. No. 22, pp. 1-8, 2009.
  11. S.H. Hoseini, T. Pirbodaghi, M.T. Ahmadian, G.H. Farrahi, ''On the large amplitude free vibrations of tapered beams: an analytical approach'', Mechanics Research Communications 36 (2009) 892897.
  12. M. MoghimiZand, M.T.Ahmadian, B.Rashidian, ''Semi-analytic solutions to nonlinear vibrations of microbeams under suddenly applied voltages'', Journal of Sound and Vibration 325 (2009) 382-396.
  13. A.Sakhaee-Pour, M.T.Ahmadian, A.Vafa, ''Vibrational analysis of single-walled carbon nanotubes using beam element'', Thin-Walled Structures 47 (2009) 646-652.
  14. Mahdi Moghimi Zand, Mohammad Taghi Ahmadian, ''Application of homotopy analysis method in studying dynamic pull-in instability of microsystems'', Mechanics Research Communications, Volume 36, Issue 7, October 2009, Pages 851-858
  15. Mahdi MojahediHamid Moeenfard, Mohammad T. Ahmadian, ''A New Efficient Approach for Modeling and Simulation of Nano-Switches under the Combined Effects of Intermolecular Surface Forces and Electrostatic Actuation'', Editorial Manager(tm) for International Journal of Applied Mechanic, Vol. 1, No. 4 (2009) 781-784.
  16. M.T. Ahmadian, H.A. Borhan,  E. Esmailzadeh, '' Dynamic analysis of geometrically nonlinear and electrostatically actuated micro-beams'', COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION 14 (2009) 1627-1645.
  17. T. Pirbodaghi, S.H. Hoseini, M.T. Ahmadian, G.H. Farrahi, '' Duffing equations with cubic and quintic nonlinearities'', Computers and Mathematics with Applications 3 (2009) 500-506
  18. A. Sakhaee-Pour, M.T. Ahmadian, A. Vafai, '' Potential application of single-layered graphene sheet as strain sensor'', Solid State Communications 147 (2008) 336-340.
  19. M.T. Ahmadian, M. Moghimi Zand, '' vibrational analysis of electrostatically actuated microstructures considering nonlinear effects'', COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, Volume 14, Issue 4, April 2009, Pages 1664-1678
  20. T. Pirbodaghi,  M.T. Ahmadian, M Fesanghary, '' On the homotopy analysis method for non-linear vibration of beams'', MECHANICS RESEARCH COMMUNICATIONS, Volume 36, Issue 2, March 2009, Pages 143-148
  21. M. Nili, M. Durali, A. Hajilui and F. Ghadak, "Inverse Design of 2-D Subsonic Duct Using Flexible String Algorithm", J. of Inverse Problems in Science and Engineering, vol. 17, no. 8, pp 10037-10057, 2009.
  22. M. Durali and M. M. Jalili, "A New Criterion for Assessment of Train Derailment Risk", J. of Multibody System Dynamics, 2009.
  23. M. Ghassabzadeh and M. Durali, The Effect of Three-Dimensional Crack Growth on the Force Distribution and Meshing Stiffness of a Spur Gear, Proceedings of the institute of Mechanical Engineering Partc-Journal of ME, vol. 223, no. 1217, pp 1633-1644, 2009.
  24. Design and Manufacture of a Wax Injection Tool for Investment Casting Using Rapid Tooling (Sadegh Rahmati, Mohamad Reza Rezaei and Javad Akbari)Tsinghua Science & Technology, Vol 14, No. 7, pp 108-115 2009
  25. M. Salehi ,G.R. Vossoughi, High Precision Impedance Control for Flexible Base Moving Manipulators, J. of Advanced Robotics, Vol. 23, No. 1-2, pp.65-78 , Jan 2009
  26. M. Abtahi, H. Pendar, Aria. Alasti, G. R. Vossoughi, “Calibration of parallel kinematic machine tools using mobility constraint on the tool center point”. Int. J. Advanced Manufacturing Technology, Mar. 2009 (Published on line)
  27. S.M. Mostafavi Kashani, H. Salarie, G.R. Vossoughi, Control of nonlinear systems on Poincar section via quasi-sliding mode method, Communications in Nonlinear Science and Numerical Simulations , Vol. 14, No. 2, pp.645-654, March 2009
  28. H. Salarie, M. Kashani, , G.R. Vossoughi, Aria Alasti, “Stabilizing unstable fixed points of discrete chaotic systems via quasi-sliding mode method”, Communications in Nonlinear Science and Numerical Simulations , Vol. 14, No. 2, pp.839-849 , March 2009
  29. M H. Abedinnasab, G. R. Vossoughi, “Analysis of a 6-DOF Redundantly Actuated 4-Legged Parallel Mechanism Nonlinear Dynamics”, In press (published on line Apr. 2009)
  30. Ali Selk Ghaffari, Ali Meghdari and Gholamreza Vossoughi, “Feedback control of the neuromusculoskeletal system in a forward dynamics simulation of stair locomotion”, Proc. IMechE Part H: J. Engineering in Medicine, pp. 663-675 ,Apr. 2009
  31. Ali Selk Ghaffari, Ali Meghdari and Gholamreza Vossoughi, Forward dynamics simulation of human walking employing an iterative feedback tuning approach, Vol. 223, pp. 289-297 Apr. 2009
  32. M.R. Azghani, F. Farahmand, Ali Meghdari , G. R. Vossoughi ,M. Parnianpour, Design and evaluation of a novel triaxial isometric trunk muscle strength measurement system Proc. IMechE Part H: J. Engineering in Medicine, Vol. 223, No. 6, pp. 755-766, Aug. 2009
  33. Ali Selk Ghaffari, Ali Meghdari and Gholamreza Vossoughi, Estimation of human lower extremity musculoskeletal conditions during backpack load carrying, Scientia Iranica Volume 5, pp.  451-462 October 2009
  34. H. Moradi, M.R. Movahedi, , G. R. Vossoughi Sliding mode control of machining chatter in the presence of tool wear and parametric uncertainty Journal of Vibration and Control, In press
  35. S. Etemadi, A. Alasty, G.R. Vossoughi, "Coordination of Cohesive Multi-agent Systems with Limited Field of View to Track a Desired Path Using Active Leader and Local Data through Lyapunov Control Method", Accepted for publication in the Asian Journal of Control.
  36. Azghani MR, Farahmand F, Meghdari M, Vossoughi G, Parnianpour M, Design and evaluation of a novel triaxial isometric trunk muscle strength measurement system, Proceedings of the Institution of Mechanical Engineers- Part H: Journal of Engineering in Medicine, 233 (1): 755-766, 2009.
  37. Seyed Mohseni S, Farahmand F, Karimi H, Kamali M, Arthrometric evaluation of stabilizing effect of knee functional bracing at different flexion angles, Journal of Sports Science and Medicine, 8 (2): 247-251, 2009
  38. Karami M, Gouran Savadkoohi D, Ghadirpoor A, Rahimpoor S, Azghani M, Farahmand F, A computer model for evaluating the osteotomy parameters of Chiari pelvic osteotomy, International Orthopaedics (SICOT), 8 Apr 2009 [Epub ahead of print].
  39. Pishdast H, Farahmand F, Rouhi Gh.R, Using a truss-inspired model with the uniform strength optimization theory to predict spongy bone geometry in proximal femur. American Journal of Applied Sciences, 6 (3): 449-455, 2009.